EN 13001-3-3-2014 起重机.通用设计.3.3部分_极限状态证明轮.轨接触能力.pdf

标准号：EN 13001-3-3-2014
实施状态：现行
中文名称：起重机.通用设计.3.3部分:极限状态证明轮.轨接触能力
英文名称：Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
发布日期：2014-10
代替标准：FprEN 13001-3-3-2014
采用标准：DIN EN 13001-3-3-2015,IDT;BS EN 13001-3-3-2014,IDT;NF E52-013-3-2014,IDT;SN EN 13001-3-3-2014,IDT;OENORM EN 13001-3-3-2015,IDTN-EN 13001-3-3-2014,IDT;SS-EN 13001-3-3-2014,IDT;UNE-EN 13001-3-3-2015,IDT;TS EN 13001-3-3-2014,IDT;TS EN 13001-3-3-2015,IDT;DS/EN 13001-3-3-2014,IDT;UNI EN 13001-3-3:2015-2015,IDT;STN EN 13001-3-3-2015,IDT;STN EN 13001-3-3-2015,IDT;CSN EN 13001-3-3-2015,IDT;DS/EN 13001-3-3-2014,IDT;NEN-EN 13001-3-3:2014 en-2014,IDT;SFS-EN 13001-3-3:en-2014,IDT
标准简介：This European Standard is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of wheel/rail contacts of cranes by design and theoretical verification. This European Standard covers requirements for steel and cast iron wheels and is applicable for metallic wheel/rail contacts only. Roller bearings are not in the scope of this European Standard. Exceeding the limits of strength is a significant hazardous situation and hazardous event that could result in risks to persons during normal use and foreseeable misuse. Clause 5 to Clause 6 of this European Standard are necessary to reduce or eliminate the risks associated with this hazard. This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types. This European Standard is for design purposes only and should not be seen as a guarantee of actual performance. EN 13001-3-3 deals only with limit state method in accordance with EN 13001-1.
文件格式：PDF
文件大小：1.15MB
文件页数：28
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：