EN 13445-6-2014 不燃烧的压力容器.第6部分_压力容器的设计和建造以及球形石墨铸铁建造耐压部分的要求.pdf

标准号：EN 13445-6-2014
实施状态：现行
中文名称：不燃烧的压力容器.第6部分:压力容器的设计和建造以及球形石墨铸铁建造耐压部分的要求
英文名称：Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron (Incorporates Amendment A1: 2015)
发布日期：2014-09
代替标准：EN 13445-6-2009;EN 13445-6/prA1-2013
采用标准：DIN EN 13445-6-2014,IDT;DIN EN 13445-6-2015,IDT;DIN EN 13445-6-2016,IDT;BS EN 13445-6+A1-2014,IDT;NF E86-200-6-2014,IDT;SN EN 13445-6-2014,IDT;OENORM EN 13445-6-2014,IDT;OENORM EN 13445-6-2017,IDT;OENORM EN 13445-6/A1-2015,IDTN-EN 13445-6-2014,IDT;SS-EN 13445-6-2014,IDT;SS-EN 13445-6+C2-2015,IDT;UNE-EN 13445-6-2015,IDT;TS EN 13445-6-2014,IDT;TS EN 13445-6-2015,IDT;DS/EN 13445-6-2014,IDT;DS/EN 13445-6-2015,IDT;DS/EN 13445-6-2016,IDT;UNI EN 13445-6:2015-2015,IDT;UNI EN 13445-6:2016-2016,IDT;STN EN 13445-6-2015,IDT;STN EN 13445-6-2016,IDT;CSN EN 13445-6-2015,IDT;DS/EN 13445-6-2014,IDT;DS/EN 13445-6-2015,IDT;DS/EN 13445-6-2016,IDT;NEN-EN 13445-6:2014 en-2014,IDT;SFS-EN 13445-6:en-2014,IDT;SFS-EN 13445-6:en-2015,IDT;SFS-EN 13445-6:en-2016,IDT
标准简介：This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than 100 bar and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness limitation of the shell does not apply to thickness of flanges, reinforcements, bosses etc. The allowable grades do not include lamellar graphite cast iron grades for ferritic and austenitic grades, which are explicitly excluded from this European Standard because of low elongation and brittle material behaviour, which requires the use of different safety factors and a different approach. NOTE 1 Austenitic spheroidal graphite cast iron grades are principally used for high and low temperature applications and for their corrosion resistance properties. NOTE 2 The allowable grades of spheroidal graphite cast iron are listed in Tables 3 and Tables 4. Service conditions are given in Clause 4.
文件格式：PDF
文件大小：1.38MB
文件页数：60
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：