EN 16603-50-04-2014 航天工程.空间数据传输器.遥控协议,同步性及信道编码.pdf

标准号：EN 16603-50-04-2014
实施状态：现行
中文名称：航天工程.空间数据传输器.遥控协议,同步性及信道编码
英文名称：Space engineering - Space data links - Telecommand protocols@ synchronization and channel coding
发布日期：2014-09
代替标准：FprEN 16603-50-04-2013
采用标准：DIN EN 16603-50-04-2014,IDT;BS EN 16603-50-04-2014,IDT;ECSS-E-ST-50-04C-2008,NEQ;SN EN 16603-50-04-2014,IDT;OENORM EN 16603-50-04-2014,IDTN-EN 16603-50-04-2014,IDT;SS-EN 16603-50-04-2014,IDT;UNE-EN 16603-50-04-2014,IDT;DS/EN 16603-50-04-2014,IDT;UNI CEI EN 16603-50-04:2015-2015,IDT;STN EN 16603-50-04-2015,IDT;CSN EN 16603-50-04-2015,IDT;DS/EN 16603-50-04-2014,IDT;NEN-EN 16603-50-03:2014 en-2014,IDT;NEN-EN 16603-50-04:2014 en-2014,IDT;SFS-EN 16603-50-04:en-2014,IDT
标准简介：This clause contains the detailed specification of the logic of the Communications Operation Procedure-1 (COP-1) in the transfer sublayer. COP-1 consists of a pair of synchronized procedures which execute within one virtual channel at the sending and receiving ends of the transfer sublayer. At the sending end, the Frame Operation Procedure-1 (FOP-1) is executed. At the receiving end, a corresponding Frame Acceptance and Reporting Mechanism-1 (FARM-1) is executed. COP-1 is just one of the procedures performed within the transfer sublayer. It is the first procedure performed when a frame data unit (FDU) is received by the transfer sublayer at the sending end and the last one performed before the FDU is delivered to the next higher sublayer at the receiving end.
文件格式：PDF
文件大小：2.41MB
文件页数：158
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：