EN 16603-50-13-2014 航天工程.航天器内飞机内部时分制指令_响应式多路传输(MIL-STD-1553B)数据总线的接口及通信协议.pdf

标准号：EN 16603-50-13-2014
实施状态：现行
中文名称：航天工程.航天器内飞机内部时分制指令/响应式多路传输(MIL-STD-1553B)数据总线的接口及通信协议
英文名称：Space engineering - Interface and communication protocol for MIL-STD-1553B data bus onboard spacecraft
发布日期：2014-09
代替标准：FprEN 16603-50-13-2013
采用标准：DIN EN 16603-50-13-2014,IDT;BS EN 16603-50-13-2014,IDT;ECSS-E-ST-50-13C-2008,NEQ;OENORM EN 16603-50-13-2015,IDTN-EN 16603-50-13-2014,IDT;SS-EN 16603-50-13-2014,IDT;UNE-EN 16603-50-13-2014,IDT;DS/EN 16603-50-13-2014,IDT;UNI CEI EN 16603-50-13:2015-2015,IDT;STN EN 16603-50-13-2015,IDT;CSN EN 16603-50-13-2015,IDT;DS/EN 16603-50-13-2014,IDT;NEN-EN 16603-50-13:2014 en-2014,IDT;SFS-EN 16603-50-13:en-2014,IDT
标准简介：Tailoring is a process by which individual requirements or specifications, standards and related documents are evaluated and made applicable to a specific project, by selection of requirements. This clause provides recommendations, guidelines and templates for tailoring according to project requirements. Tailoring information and general policy is described in ECSS-S-ST-00C. A.2 Tailoring options and parameters A.2.1 Overview Most of the services requirements defined in this standard are not configurable. However, there are options identified as well as different levels of performance depending on the value assigned to services managed parameters. It is necessary to specify those parameters for a given project in accordance with user's communication requirements. It is recommended to perform tailoring in the two steps described in A.2.2 and A.2.3.
文件格式：PDF
文件大小：2.35MB
文件页数：104
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：