麦田学社 下载中心 标准分享 国外标准 EN 13001-3-2-2014 起重机.通用设计.3.2部分_证明钢丝绳滑车装绳的能力和极限状态.pdf

EN 13001-3-2-2014 起重机.通用设计.3.2部分_证明钢丝绳滑车装绳的能力和极限状态.pdf

 

EN 13001-3-2-2014 起重机.通用设计.3.2部分:证明钢丝绳滑车装绳的能力和极限状态:
标准号:EN 13001-3-2-2014
实施状态:现行
中文名称:起重机.通用设计.3.2部分:证明钢丝绳滑车装绳的能力和极限状态
英文名称:Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
发布日期:2014-08
代替标准:CEN/TS 13001-3-2-2008;FprEN 13001-3-2-2014
采用标准:DIN EN 13001-3-2-2014,IDT;DIN EN 13001-3-2-2015,IDT;BS EN 13001-3-2-2014,IDT;NF E52-013-2-2014,IDT;SN EN 13001-3-2-2014,IDT;OENORM EN 13001-3-2-2014,IDT;OENORM EN 13001-3-2-2016,IDTN-EN 13001-3-2-2014,IDT;SS-EN 13001-3-2-2014,IDT;UNE-EN 13001-3-2-2015,IDT;TS EN 13001-3-2-2016,IDT;DS/EN 13001-3-2-2014,IDT;UNI EN 13001-3-2:2015-2015,IDT;STN EN 13001-3-2-2015,IDT;STN EN 13001-3-2-2015,IDT;CSN EN 13001-3-2-2015,IDT;DS/EN 13001-3-2-2014,IDT;NEN-EN 13001-3-2:2014 en-2014,IDT;SFS-EN 13001-3-2:en-2014,IDT
标准简介:This European Standard is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of wire ropes of cranes by design and theoretical verification. NOTE Specific requirements for particular types of cranes are given in the appropriate European Standard for the particular crane type. The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during intended use and reasonably foreseeable misuse. Clauses 5 to 6 of this standard are necessary to reduce or eliminate risks associated with the following hazard: exceeding the limits of strength (yield, ultimate, fatigue). This European Standard is not applicable to cranes which are manufactured before the date of its publication as EN and serves as reference base for the European Standards for particular crane types (see Annex C). EN 13001-3-2 deals only with the limit state method in accordance with EN 13001-1.
文件格式:PDF
文件大小:1.36MB
文件页数:40
(以上信息更新时间为:2019-11-28)



文档语言及版本参照下方封面截图:
EN 13001-3-2-2014 起重机.通用设计.3.2部分:证明钢丝绳滑车装绳的能力和极限状态
点击下方链接查看更多内容。