EN 16603-20-08-2014 航天工程.第20-08部分_光电装备及部件.pdf

标准号：EN 16603-20-08-2014
实施状态：现行
中文名称：航天工程.第20-08部分:光电装备及部件
英文名称：Space engineering - Part 20-08: Photovoltaic assemblies and components
发布日期：2014-08
代替标准：FprEN 16603-20-08-2013
采用标准：DIN EN 16603-20-08-2014,IDT;BS EN 16603-20-08-2014,IDT;ECSS-E-ST-20-08C-2012,NEQ;NF L90-300-20-08-2016,IDTR NF L90-300-20-08,IDT;SN EN 16603-20-08-2014,IDT;OENORM EN 16603-20-08-2014,IDTN-EN 16603-20-08-2014,IDT;SS-EN 16603-20-08-2014,IDT;UNE-EN 16603-20-08-2014,IDT;DS/EN 16603-20-08-2014,IDT;UNI CEI EN 16603-20-08:2015-2015,IDT;STN EN 16603-20-08-2015,IDT;CSN EN 16603-20-08-2015,IDT;DS/EN 16603-20-08-2014,IDT;NEN-EN 16603-20-08:2014 en-2014,IDT;SFS-EN 16603-20-08:en-2014,IDT
标准简介：This Standard specifies the general requirements for the qualification, procurement, storage and delivery of photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes suitable for space applications. This standard does not cover the particular qualification requirements for a specific mission. This Standard primarily applies to qualification approval for photovoltaic assemblies, solar cell assemblies, bare solar cells, coverglasses and protection diodes, and to the procurement of these items. This standard is limited to crystaline Silicon and single and multi-junction GaAs solar cells with a thickness of more than 50 µm and does not include thin film solar cell technologies and poly-crystaline solar cells. This Standard does not cover the concentration technology, and especially the requirements related to the optical components of a concentrator (e.g. reflector and lens) and their verification (e.g. collimated light source). This Standard does not apply to qualification of the solar array subsystem, solar panels, structure and solar array mechanisms. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
文件格式：PDF
文件大小：1.85MB
文件页数：198
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：