IEC 60079-19-2006 爆炸性环境.第19部分_设备检修和改造.pdf

标准号：IEC 60079-19-2006
实施状态：作废
中文名称：爆炸性环境.第19部分:设备检修和改造
英文名称：Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
发布日期：2006-10
被替代标准：IEC 60079-19-2010
代替标准：IEC 31J/124/FDIS-2006;IEC 60079-19-1993
采用标准：DIN EN 60079-19-2008,IDT;BS EN 60079-19-2007,IDT;EN 60079-19-2007,IDT;NF C23-579-19-2007,IDT;OEVE/OENORM EN 60079-19-2008,IDTN-EN 60079-19-2007,IDT;UNE-EN 60079-19-2008,IDT;GOST R 52350.19-2007,IDT
起草单位：IEC/SC 31J
标准简介：This part of IEC 60079
– gives instructions, principally of a technical nature, on the repair, overhaul, reclamation
and modification of a certified equipment designed for use in explosive atmospheres;
– is not applicable to maintenance, other than when repair and overhaul cannot be
disassociated from maintenance, neither does it give advice on cable entry systems which
may require renewal when the equipment is re-installed;
– is not applicable to type of protection 'm';
– assumes that good engineering practices are adopted throughout.
NOTE Much of the content of this standard is concerned with the repair and overhaul of electrical rotating
machines. This is not because they are the most important items of explosion-protected equipment but rather
because they are often major items of repairable capital equipment in which, whatever type of protection is
involved, sufficient commonality of construction exists as to make possible more detailed instructions for their
repair, overhaul, reclamation or modification.
文件格式：PDF
文件大小：810.02KB
文件页数：118
（以上信息更新时间为：2019-11-25）



文档语言及版本参照下方封面截图：