IEC 61133-2006 铁道设施.铁道车辆.车辆组装后和运行前的整车试验.pdf

标准号：IEC 61133-2006
实施状态：作废
中文名称：铁道设施.铁道车辆.车辆组装后和运行前的整车试验
英文名称：Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
发布日期：2006-10
被替代标准：IEC 61133-2016
代替标准：IEC 9/953/FDIS-2006;IEC 61133-1992
采用标准：JIS E 4041-2009,MOD
起草单位：IEC/TC 9
标准简介：This International Standard specifies general criteria to demonstrate by testing that newly
constructed complete railway vehicles conform with standards or other normative documents.
This standard, as a whole or in part, applies to all railway vehicles except special purpose
vehicles such as track-laying machines, ballast cleaners and personnel carriers. The extent of
application of the standard for particular vehicles will be specifically mentioned in the
contract.
NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight,
powered trailer, etc.).
NOTE 2: The scope of this standard excludes railbound and road/rail vehicles for construction and maintenance
of railway infrastructure.
NOTE 3 This standard does not deal with tests carried out on components or equipment before fitting to the
vehicle.
Insofar as this standard is applicable it may be used for the following:
– generator sets mounted on a vehicle provided for auxiliary purposes;
– the electrical transmission used on trolley buses or similar vehicles;
– control and auxiliary equipment of vehicles with non-electrical propulsion systems;
– vehicles guided, supported or electrically propelled by systems which do not use the
adhesion between wheel and rail.
文件格式：PDF
文件大小：942.24KB
文件页数：136
（以上信息更新时间为：2019-11-25）



文档语言及版本参照下方封面截图：