IEC 60923 Edition 3.1-2006 灯的辅助设备.放电灯用镇流器(管状荧光灯除外).性能规范.pdf

标准号：IEC 60923 Edition 3.1-2006
实施状态：现行
中文名称：灯的辅助设备.放电灯用镇流器(管状荧光灯除外).性能规范
英文名称：Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
发布日期：2006-09
采用标准：SANS 60923-2007,IDT
起草单位：IEC/SC 34C
标准简介：This International Standard specifies performance requirements for ballasts for discharge
lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure
sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific
requirements for a particular type of ballast. This standard covers inductive type ballasts for
use on a.c. supplies up to 1 000 V at 50 Hz to 60 Hz associated with discharge lamps, having
rated wattage, dimensions and characteristics as specified in the relevant IEC lamp
standards.
NOTE 1 For certain types of discharge lamps an ignitor is required.
NOTE 2 Extension of the standard to cover ballasts incorporating, or for use with, series capacitors is under
consideration.
NOTE 3 The performance requirements of ballasts for tubular fluorescent lamps are covered by IEC 60921.
NOTE 4 There are regional standards regarding the regulation of mains current harmonics for end-products such
as luminaires and independent control gear. In a luminaire the control gear is dominant in this respect. Control
gear, together with other components, should comply with these standards.
文件格式：PDF
文件大小：632.64KB
文件页数：56
（以上信息更新时间为：2019-11-25）



文档语言及版本参照下方封面截图：