IEC 61300-3-32-2006 光纤互连装置和无源元件.基本试验和测量程序.第3-32部分_检查和测量.无源光学元件的偏振模式离差测量.pdf

标准号：IEC 61300-3-32-2006
实施状态：现行
中文名称：光纤互连装置和无源元件.基本试验和测量程序.第3-32部分:检查和测量.无源光学元件的偏振模式离差测量
英文名称：Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components
发布日期：2006-08
代替标准：IEC 86B/2325/FDIS-2006
采用标准：DIN EN 61300-3-32-2007,IDT;BS EN 61300-3-32-2006,IDT;EN 61300-3-32-2006,IDT;NF C93-903-32-2006,IDT;OEVE/OENORM EN 61300-3-32-2007,IDTN-EN 61300-3-32-2007,IDT;UNE-EN 61300-3-32-2007,IDT
起草单位：IEC/SC 86B
标准简介：This part of IEC 61300 presents a number of alternative methods for measuring the
polarization mode dispersion (PMD) of a passive fibre optic device under test (DUT). These
methods typically measure PMD using either a frequency domain or time domain approach. In
the frequency domain, the polarization properties of the DUT are analysed. In the time domain
approach, the pulse delay or broadening is observed.
This procedure will cover measurements of both broadband, and narrowband dense
wavelength division multiplexing (DWDM) passive fibre optic devices. Differences between
measurement practices for these varied classes of passive fibre optic devices will be noted in
the text.
This procedure can be applied to laboratory, factory and field measurements of PMD in
passive fibre optic devices. Limitation of the application of some methods will be noted in the
text when necessary.
This procedure can be applied to a transmissive or reflective DUT. In the latter case, the DUT
connection is via a coupler or circulator, which should have a known very low PMD value.
文件格式：PDF
文件大小：1.58MB
文件页数：122
（以上信息更新时间为：2019-11-25）



文档语言及版本参照下方封面截图：