IEC 62384-2006 发光二极管模块的直流或交流电源电子控制装置.性能要求.pdf

标准号：IEC 62384-2006
实施状态：现行
中文名称：发光二极管模块的直流或交流电源电子控制装置.性能要求
英文名称：D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements
发布日期：2006-08
代替标准：IEC 34C/752/FDIS-2006
采用标准：DIN EN 62384-2007,IDT;DIN EN 62384-2010,IDT;BS EN 62384+A1-2006,IDT;GB/T 24825-2009,MOD;EN 62384-2006,IDT;NF C71-305-2006,IDT;JIS C 8153-2009,MOD;OEVE/OENORM EN 62384-2007,IDT;OEVE/OENORM EN 62384-2010,IDTN-EN 62384-2006,IDTN-EN 62384-2007,IDT;UNE-EN 62384-2007,IDT
起草单位：IEC/SC 34C
标准简介：This international standard specifies performance requirements for electronic control gear for
use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with an
output frequency which can deviate from the supply frequency, associated with LED modules
according to IEC 62031. Control gear for LED modules specified in this standard are designed
to provide constant voltage or current. Deviations from the pure voltage and current types do
not exclude the gear from this standard.
NOTE 1 The tests in this standard are type tests. Requirements for testing individual control gear during
production are not included.
NOTE 2 Requirements for control gear which incorporate means for varying the output power are under
consideration.
NOTE 3 It may be expected that control gear complying with this standard will ensure satisfactory operation
between 92 % and 106 % of the rated supply voltage, taking into account the specifications of the LED module
manufacturer.
文件格式：PDF
文件大小：508.31KB
文件页数：38
（以上信息更新时间为：2019-11-25）



文档语言及版本参照下方封面截图：