IEC 60076-13-2006 电力变压器.第13部分_自我保护式充液变压器.pdf

标准号：IEC 60076-13-2006
实施状态：现行
中文名称：电力变压器.第13部分:自我保护式充液变压器
英文名称：Power transformers - Part 13: Self-protected liquid-filled transformers
发布日期：2006-05
代替标准：IEC 14/530/FDIS-2006
采用标准：DIN EN 60076-13-2007,IDT;BS EN 60076-13-2006,IDT;EN 60076-13-2006,IDT;NF C52-176-13-2007,IDT;C52-176-13PR,IDT;OEVE/OENORM EN 60076-13-2007,IDTN-EN 60076-13-2007,IDTN-EN 60076-13-2008,IDT;UNE-EN 60076-13-2008,IDT
起草单位：IEC/TC 14
标准简介：This part of IEC 60076 applies to high-voltage/low-voltage self-protected liquid-filled and
naturally cooled transformers for rated power 50 kVA to 1 000 kVA for indoor or outdoor use
having a
– primary winding (high-voltage) with highest voltage for equipment up to 24 kV;
– secondary winding (low-voltage) with highest voltage for equipment of 1,1 kV.
These transformers are equipped with a self-protection and disconnection device to protect
the environment, property and people and prevent any disturbance of the high-voltage
network from the consequences of an internal transformer fault.
Transformers covered by this standard comply with the relevant requirements prescribed in
the IEC 60076 series.
The self-protected transformer may be used in conjunction with other devices to provide
system coordination and sensitive system protection. The protection system is not designed
to be functional when the power supply is from the low-voltage side. The self-protected
transformer is not intended to function in parallel with another transformer.
NOTE This standard may be applied to transformers with a higher voltage than 24 kV or other rated power by
agreement between the manufacturer and the purchaser. Validation tests should be carried out at the appropriate
level.
文件格式：PDF
文件大小：508.22KB
文件页数：44
（以上信息更新时间为：2019-11-25）



文档语言及版本参照下方封面截图：