ISO 1874-1-2010 塑料.模塑和挤塑用聚酰胺(PA)共聚物和均聚物.第1部分_规格用命名体系和基础.pdf

标准号：ISO 1874-1-2010
实施状态：作废
中文名称：塑料.模塑和挤塑用聚酰胺(PA)共聚物和均聚物.第1部分:规格用命名体系和基础
英文名称：Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification
发布日期：2010-11-15
实施日期：2010-11-15
被替代标准：ISO 16396-1-2015
代替标准：ISO 1874-1-1992;ISO/FDIS 1874-1-2010
采用标准：BS EN ISO 1874-1-2010,IDT;EN ISO 1874-1-2010,IDTN-EN ISO 1874-1-2010,IDT
起草单位：ISO/TC 61
标准简介：This part of ISO 1874 establishes a system of designation for polyamide (PA) thermoplastic materials, which may be used as the basis for specifications.
It covers polyamide homopolymers for moulding and extrusion based on PA 6, PA 66, PA 69, PA 610, PA 612, PA 11, PA 12, PA MXD6, PA 46, PA 1212, PA 4T, PA 6T and PA 9T and copolyamides of various compositions for moulding and extrusion.
The types of polyamide plastic are differentiated from each other by a classification system based on appropriate levels of the designatory properties
a)
viscosity number,
b)
tensile modulus of elasticity and
c)
presence of nucleating agent,
and on information about chemical structure, intended application, method of processing, important properties, additives, colour, fillers and reinforcing materials.
The designation system is applicable to all polyamide homopolymers and copolymers. It applies to materials ready for normal use, unmodified and modified by colorants, additives, fillers, reinforcing materials, polymer modifiers, etc.
This part of ISO 1874 does not apply to monomer casting-type polyamides of PA 6 and PA 12.
It is not intended to imply that materials having the same designation give necessarily the same performance. This part of ISO 1874 does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing. If such additional properties are required, they shall be determined in accordance with the test methods specified in ISO 1874-2, if suitable.
In order to specify a thermoplastic material for a particular application or reproducible processing, additional requirements may be given in data block 5 (see 3.1 and 3.6).
文件格式：PDF
文件大小：1.02MB
文件页数：20
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：