ISO 26945-2008 金属和其它无机镀层.锡-钴合金的电镀层.pdf

标准号：ISO 26945-2008
实施状态：作废
中文名称：金属和其它无机镀层.锡-钴合金的电镀层
英文名称：Metallic and other inorganic coatings - Electrodeposited coatings of tin-cobalt alloy
发布日期：2008-12
被替代标准：ISO 26945-2011
代替标准：ISO/FDIS 26945-2008
采用标准：DIN EN ISO 26945-2009,IDT;BS EN ISO 26945-2009,IDT;EN ISO 26945-2008,IDT;NF A91-089-2009,IDT;SN EN ISO 26945-2009,IDT;OENORM EN ISO 26945-2009,IDTN-EN ISO 26945-2009,IDT;UNE-EN ISO 26945-2010,IDT
起草单位：ISO/TC 107
标准简介：This International Standard specifies electrodeposited coatings of tin-cobalt alloy of approximate composition
75 % (mass fraction) to 80 % (mass fraction) tin, remainder cobalt, as a substitute for decorative chromium
coatings of 0.1 μm to 0.3 μm thickness. Hardness and wear resistance properties of the coatings obtained are
not equivalent to those of chromium coatings, but similar to those of tin-nickel alloy coatings.
Tin-cobalt alloy coatings can be applied by rack or barrel plating processes.
This International Standard does not specify requirements for the surface condition of the basis metal prior to
electroplating.
文件格式：PDF
文件大小：171.82KB
文件页数：18
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：