麦田学社 下载中心 ISO 11611-2007 焊接和类似工艺用防护服装.pdf

版块导航

热门下载

麦田学社 © my678.cn

ISO 11611-2007 焊接和类似工艺用防护服装.pdf

 

ISO 11611-2007 焊接和类似工艺用防护服装:
标准号:ISO 11611-2007
实施状态:作废
中文名称:焊接和类似工艺用防护服装
英文名称:Protective clothing for use in welding and allied processes
发布日期:2007-10
被替代标准:ISO 11611-2015
代替标准:ISO/FDIS 11611-2007
采用标准:DIN EN ISO 11611-2008,IDT;BS EN ISO 11611-2008,IDT;EN ISO 11611-2007,IDT;NF S74-518-2008,IDT;SN EN ISO 11611-2007,IDT;OENORM EN ISO 11611-2008,IDTN-EN ISO 11611-2007,IDTN-EN ISO 11611-2009,IDT;UNE-EN ISO 11611-2008,IDT
起草单位:ISO/TC 94
标准简介:This International Standard specifies minimum basic safety requirements and test methods for protective
clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including
head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable
risks. For the protection of the wearer’s head and feet, this International Standard is only applicable to hoods
and gaiters. This International Standard does not cover requirements for hand protection.
This type of protective clothing is intended to protect the wearer against spatter (small splashes of molten
metal), short contact time with flame, radiant heat from the arc, and minimizes the possibility of electrical
shock by short-term, accidental contact with live electrical conductors at voltages up to approximately
100 V d.c. in normal conditions of welding. Sweat, soiling or other contaminants can affect the level of
protection provided against short-term accidental contact with live electric conductors at these voltages.
This International Standard specifies two classes with specific performance requirements (see Annex A), i.e.
Class 1 being the lower level and Class 2 the higher level.
-- Class 1 is protection against less hazardous welding techniques and situations, causing lower levels of
spatter and radiant heat.
-- Class 2 is protection against more hazardous welding techniques and situations, causing higher levels of
spatter and radiant heat.
Details are given in Table 1 and Annex B.
For adequate overall protection against the risks to which welders are likely to be exposed, personal
protective equipment (PPE) covered by other standards should additionally be worn to protect the head, face,
hands and feet.
文件格式:PDF
文件大小:187.23KB
文件页数:20
(以上信息更新时间为:2019-11-22)



文档语言及版本参照下方封面截图:
ISO 11611-2007 焊接和类似工艺用防护服装
点击下方链接查看更多内容。