ISO 1179-1-2007 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第1部分_螺纹开口.pdf

标准号：ISO 1179-1-2007
实施状态：作废
中文名称：通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第1部分:螺纹开口
英文名称：Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
发布日期：2007-08
被替代标准：ISO 1179-1-2013
代替标准：ISO 1179-1981;ISO/FDIS 1179-1-2007
采用标准：DIN EN ISO 1179-1-2008,IDT;DIN EN ISO 1179-1-2008,IDT;BS EN ISO 1179-1-2009,IDT;EN ISO 1179-1-2008,IDT;prEN ISO 1179-1-2007,IDT;NF E49-051-1-2008,IDT;E49-051-1PR,IDT;SN EN ISO 1179-1-2008,IDT;OENORM EN ISO 1179-1-2008,IDT;OENORM EN ISO 1179-1-2008,IDTN-EN ISO 1179-1-2008,IDT;UNE-EN ISO 1179-1-2009,IDT
起草单位：ISO/TC 131
标准简介：This part of ISO 1179 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud
ends shown in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in ISO 1179-3.
Ports in accordance with this part of ISO 1179 may be used:
with ISO 1179-2 heavy-duty (S series) stud ends with type E sealing at working pressures up to 63 MPa
(630 bar) and light-duty (L series) stud ends at working pressures up to 25 MPa (250 bar);
with ISO 1179-3 light-duty (L series) stud ends with type G sealing at working pressures up to 31,5 MPa
(315 bar), and with ISO 1179-3 light-duty (L series) adjustable stud ends with type H sealing at working
pressures up to 20 MPa (200 bar);
with ISO 1179-4 stud ends with type B sealing at working pressures up to 40 MPa (400 bar) for the S
series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series,
except for the G2 size port, which in hydraulic fluid power systems is used mainly with accumulators and for
which ISO 1179-2, ISO 1179-3 and ISO 1179-4 do not specify stud ends. The permissible working pressure
depends upon size, materials, design, working conditions, application, etc.
Users of this part of ISO 1179 should ensure that there is sufficient material around the port to maintain the
pressure.
NOTE The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for new
designs in hydraulic and pneumatic fluid power applications.
文件格式：PDF
文件大小：149.87KB
文件页数：10
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：