ISO 13856-3-2006 机械安全.压敏保护装置.第3部分_压敏减震器、压敏平板和压敏带和类似装置设计和测试用一般原则.pdf

标准号：ISO 13856-3-2006
实施状态：作废
中文名称：机械安全.压敏保护装置.第3部分:压敏减震器、压敏平板和压敏带和类似装置设计和测试用一般原则
英文名称：Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices
发布日期：2006-10
被替代标准：ISO 13856-3-2013
代替标准：ISO/DIS 13856-3-2005
采用标准：GB/T 17454.3-2008,IDT
起草单位：ISO/TC 199
标准简介：This part of ISO 13856 gives basic requirements for those pressure-sensitive protective devices, with or
without an external reset facility, that are not specified in either ISO 13856-1 or ISO 13856-2, the majority of
which are produced for specific applications and are not available as off-the-shelf items. It also gives specific
requirements for the following devices:
-- pressure-sensitive bumpers;
-- pressure-sensitive plates;
-- pressure-sensitive wires (trip wires).
Its purpose relates primarily to safety and reliability rather than suitability (for the relationship between safety
and reliability, see ISO 13849-1:1999, Annex D). It does not specify the dimensions of pressure-sensitive
protective devices in relation to any particular application. Specific requirements for particular applications are
intended to be set forth in relevant type-C standards (see ISO 12100-1 and the Introduction).
This part of ISO 13856 does not cover stopping devices used only for the regular operation (including
emergency stopping) of machinery. Nor does it apply to use in locations accessible to elderly or disabled
persons or children, where special additional requirements can be necessary.
文件格式：PDF
文件大小：573.45KB
文件页数：64
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：