ISO 10447-2006 焊接.点焊、凸焊和有缝焊的剥离和凿剥离试验.pdf

标准号：ISO 10447-2006
实施状态：作废
中文名称：焊接.点焊、凸焊和有缝焊的剥离和凿剥离试验
英文名称：Resistance welding - Peel and chisel testing of resistance spot and projection welds
发布日期：2006-07
被替代标准：ISO 10447-2015
代替标准：ISO 10447-1991;ISO/DIS 10447-2005
采用标准：DIN EN ISO 10447-2007,IDT;DIN EN ISO 10447-2007,IDT;BS EN ISO 10447-2007,IDT;EN ISO 10447-2007,IDT;prEN ISO 10447-2006,IDT;NF A89-580-2007,IDT;A89-580PR,IDT;SN EN ISO 10447-2007,IDT;OENORM EN ISO 10447-2007,IDT;OENORM EN ISO 10447-2007,IDTN-EN ISO 10447-2007,IDT;UNE-EN ISO 10447-2008,IDT
起草单位：ISO/IIW/IIS
标准简介：This International Standard specifies the procedure and recommended tooling to be used for testing resistance spot and projection welds by means of peel and chisel tests. It applies to welds made in two or more sheets in the thickness range of 0,5 mm to 3,0 mm.
The aim of these tests is to determine:
—   weld size and failure type when the tests are used as destructive tests, and
—   verification of welds when the tests are used as non-destructive tests.
NOTE In the previous edition of this International Standard, seam welds were included. The preferred method of peel testing seam welds (mechanized peel testing) is now covered in ISO 14270.
文件格式：PDF
文件大小：302.66KB
文件页数：14
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：