标准号:ISO 19432-2006
实施状态:作废
中文名称:建筑施工机械和设备.便携、手持、内燃机驱动的切断机.安全要求和试验
英文名称:Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing
发布日期:2006-03
被替代标准:ISO 19432-2012
代替标准:ISO/FDIS 19432-2005
采用标准:DIN EN ISO 19432-2006,IDT;DIN EN ISO 19432-2008,IDT;DIN EN ISO 19432-2010,IDT;BS EN ISO 19432-2006,IDT;BS EN ISO 19432-2009,IDT;EN ISO 19432-2006,IDT;EN ISO 19432-2008,IDT;prEN ISO 19432-2007,IDT;NF E65-403-2006,IDT;NF E65-403-2008,IDT;SN EN ISO 19432-2006,IDT;SN EN ISO 19432-2008,IDT;OENORM EN ISO 19432-2006,IDT;OENORM EN ISO 19432-2007,IDT;OENORM EN ISO 19432-2010,IDT;OENORM EN ISO 19432-2008,IDT
N-EN ISO 19432-2006,IDT
N-EN ISO 19432-2008,IDT
N-EN ISO 19432-2008,IDT;UNE-EN ISO 19432-2006,IDT;UNE-EN ISO 19432-2008,IDT
起草单位:ISO/TC 195
标准简介:This International Standard specifies safety requirements and their verification by testing for the design and construction of portable, hand-held, internal combustion engine driven, cut-off machines, intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable to those machines designed purposely for use with a rotating, bonded-abrasive and/or superabrasive (diamond) cut-off wheel having a maximum outside diameter of 406 mm, centre-mounted on, and driven by, a spindle shaft, where the top of the wheel rotates away from the operator (see Figure 1).
This International Standard deals with all significant hazards related to the hand-held use of such machines (see Clause 4). It specifies methods for the elimination or reduction of hazards arising from their use, as well as the type of information on safe working practices to be provided with the machines. Cut-off machines designed in accordance with this International Standard are intended to be used by persons who have read and understood the safety requirements given in the "instruction handbook" and who use the appropriate personal protective equipment (PPE).
Except for noise, environmental aspects are not considered by this International Standard; nor are cut-off wheel specifications given — for such specifications, see, for example, EN 12413 fl and EN 13236l2l
This International Standard is not applicable to machines manufactured before the date of its publication.
文件格式:PDF
文件大小:483.91KB
文件页数:44
(以上信息更新时间为:2019-11-22)
文档语言及版本参照下方封面截图:
点击下方链接查看更多内容。