ISO_TS 15011-5-2006 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室法.第5部分_完全或部分有机材料组成的产品在焊接或切割时产生的热降解产品的识别.pdf

标准号：ISO/TS 15011-5-2006
实施状态：作废
中文名称：焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室法.第5部分:完全或部分有机材料组成的产品在焊接或切割时产生的热降解产品的识别
英文名称：Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials
发布日期：2006-03
被替代标准：ISO 15011-5-2011
采用标准：DIN ISO/TS 15011-5-2006,IDT;BS DD CEN ISO/TS 15011-5-2006,IDT;CEN ISO/TS 15011-5-2006,IDT;OENORM CEN ISO/TS 15011-5-2006,IDT
起草单位：ISO/TC 44
标准简介：ISO/TS 15011-5:2006 specifies procedures for obtaining information about thermal degradation products generated when welding, cutting through, preheating and straightening products composed wholly or partly of organic substances, e.g. shop primers, paints, adhesives, waxes, sealants, pressing lubricant, oils, etc. It is aimed primarily at test laboratories performing such procedures. The data generated may be used by product manufacturers to provide information for inclusion in safety data sheets and by occupational hygienists to identify thermal degradation products of significance in the performance of risk assessments and/or workplace exposure measurements. The data cannot be used to estimate workplace exposure directly.

ISO/TS 15011-5:2006 is applicable to all products composed partly or wholly of organic materials that could be heated, during welding and cutting, to temperatures at which thermal degradation products are generated and where it is not apparent what those degradation products will be.
文件格式：PDF
文件大小：3.46MB
文件页数：26
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：