ISO 16834-2006 焊接消耗品.高强度钢的气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类.pdf

标准号：ISO 16834-2006
实施状态：作废
中文名称：焊接消耗品.高强度钢的气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类
英文名称：Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification
发布日期：2006-01
被替代标准：ISO 16834-2012
代替标准：ISO/FDIS 16834-2005
采用标准：DIN EN 12534-1999,MOD;DIN EN ISO 16834-2007,IDT;DIN EN ISO 16834-2006,IDT;BS EN ISO 16834-2007,IDT;EN ISO 16834-2007,IDT;prEN ISO 16834-2006,IDT;NF A81-326-2007,IDT;A81-326PR,IDT;JIS Z 3312-2009,MOD;SN EN ISO 16834-2007,IDT;OENORM EN ISO 16834-2007,IDT;OENORM EN ISO 16834-2006,IDTN-EN ISO 16834-2007,IDTN-EN ISO 16834-2009,IDT;UNE-EN ISO 16834-2008,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for classification of wire electrodes, wires, rods and weld
deposits in the as-welded condition and in the post-weld heat-treated (PWHT) condition for gas-shielded metal
arc welding and tungsten inert-gas welding of high strength steels with a minimum yield strength greater than
500 MPa, or a minimum tensile strength greater than 570 MPa. One wire electrode can be tested and
classified with different shielding gases.
This International Standard is a combined specification providing for classification utilizing a system based
upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based
upon the tensile strength and the average impact energy of 27 J of all-weld metal.
a) Subclauses and Tables which carry the suffix letter “A” are applicable only to wire electrodes, wires, rods
and deposits classified according to the system based upon the yield strength and the average impact
energy of 47 J of all-weld metal under this International Standard.
b) Subclauses and Tables which carry the suffix letter “B” are applicable only to wire electrodes, wires, rods
and deposits classified according to the system based upon the tensile strength and the average impact
energy of 27 J of all-weld metal under this International Standard.
c) Subclauses and Tables which do not have either the suffix letter “A” or the suffix letter “B” are applicable
to all wire electrodes, wires, rods and deposits classified under this International Standard.
文件格式：PDF
文件大小：231.21KB
文件页数：20
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：