ISO 3384-2005 硫化或热塑性橡胶.常温和高温下压缩时应力松弛的测定.pdf

标准号：ISO 3384-2005
实施状态：作废
中文名称：硫化或热塑性橡胶.常温和高温下压缩时应力松弛的测定
英文名称：Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures
发布日期：2005-09
被替代标准：ISO 3384-1-2011
代替标准：ISO 3384-1999;ISO/FDIS 3384-2005;ISO 3384 AMD 1-2001
采用标准：DIN ISO 3384-2008,IDT;DIN ISO 3384-2007,IDT;BS ISO 3384-2006,IDT;GB/T 1685-2008,MOD;NF T46-043-2006,IDT;OENORM ISO 3384-2009,IDT;OENORM ISO 3384-2009,IDT
起草单位：ISO/TC 45
标准简介：This International Standard specifies two methods for determining the decrease in counterforce exerted by a test piece of vulcanized or thermoplastic rubber which has been compressed to a constant deformation and maintained thus at a predetermined test temperature.
Two forms of test piece are permitted: cylindrical test pieces and rings. Different shapes and sizes of test piece give different results, and comparison of results should be limited to test pieces of similar size and shape.
The use of ring test pieces is particularly suitable for the determination of stress relaxation in liquid environments.
Testing at temperatures below standard laboratory temperature is not specified. The methods have been used for low-temperature testing, but their reliability under these conditions is not proven.
文件格式：PDF
文件大小：206.30KB
文件页数：18
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：