ISO 6224-2005 一般用途的输水用织物增强的热塑性软管.规范.pdf

标准号：ISO 6224-2005
实施状态：作废
中文名称：一般用途的输水用织物增强的热塑性软管.规范
英文名称：Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification
发布日期：2005-02
被替代标准：ISO 6224-2011
代替标准：ISO 6224-1995;ISO/FDIS 6224-2004
采用标准：DIN EN ISO 6224-2010,IDT;DIN EN ISO 6224-2008,IDT;BS EN ISO 6224-2008,IDT;EN ISO 6224-2008,IDT;prEN ISO 6224-2008,IDT;NF T47-257-2009,IDT;SN EN ISO 6224-2009,IDT;OENORM EN ISO 6224-2010,IDT;OENORM EN ISO 6224-2008,IDTN-EN ISO 6224-2009,IDT;UNE-EN ISO 6224-2009,IDT
起草单位：ISO/TC 45
标准简介：This International Standard specifies the requirements for three types of general-purpose textile-reinforced thermoplastic water-discharge hose with an operating temperature range of -10 ℃ to +60 ℃ and a maximum working pressure of 25 bar <up1)>.
NOTE   At temperatures above 23 ℃ and particularly above 40 ℃, the maximum working pressure will be reduced.
These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine inlets, as firefighting hoses, for special agricultural machines or as gardening hoses for the consumer market.
These hoses may be used with additives which lower the freezing point of water to -10 ℃.
note:1)  1bar = 0,1MPa
文件格式：PDF
文件大小：155.86KB
文件页数：10
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：