ISO 9863-1-2005 土工织物.规定压力下厚度的测定.第1部分_单层.pdf

标准号：ISO 9863-1-2005
实施状态：作废
中文名称：土工织物.规定压力下厚度的测定.第1部分:单层
英文名称：Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers
发布日期：2005-02
被替代标准：ISO 9863-1-2016
代替标准：ISO 9863-1990;ISO/FDIS 9863-1-2004
采用标准：DIN EN ISO 9863-1-2005,IDT;BS EN ISO 9863-1-2005,IDT;GB/T 13761.1-2009,MOD;EN ISO 9863-1-2005,IDT;NF G38-107-1-2006,IDT;SN EN ISO 9863-1-2005,IDT;OENORM EN ISO 9863-1-2005,IDTN-EN ISO 9863-1-2005,IDTN-EN ISO 9863-1-2007,IDT;UNE-EN ISO 9863-1-2005,IDT
起草单位：ISO/TC 221
标准简介：This part of EN ISO 9863 specifies a method for the determination of the thickness of geosynthetics at specified
pressures and defines the pressure at which the nominal thickness is determined.
The test results are intended for identification purposes and for use in technical data sheets and/or as part of other
test methods, e.g. tests of hydraulic properties.
The method is applicable to all geosynthetics.
NOTE 1 Normally the thickness of geosynthetics is determined by measuring one layer of the product. When two or more
layers are used on top of each other in a design, the test may be made in accordance with this standard with the agreed
number of layers instead of one.
NOTE 2 When testing structured geosynthetics, care should be taken to ensure that the results are meaningful for the
particular product.
文件格式：PDF
文件大小：279.29KB
文件页数：12
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：