ISO 11810-1-2005 激光和激光相关设备.手术布单和_或病人保护覆盖物耐激光性的试验方法和分类.第1部分_基本点燃和穿透性.pdf

标准号：ISO 11810-1-2005
实施状态：现行
中文名称：激光和激光相关设备.手术布单和/或病人保护覆盖物耐激光性的试验方法和分类.第1部分:基本点燃和穿透性
英文名称：Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration
发布日期：2005-02
被替代标准：ISO 11810-2015
代替标准：ISO 11810-2002;ISO/FDIS 11810-1-2004
采用标准：DIN EN ISO 11810-1-2005,IDT;DIN EN ISO 11810-1-2009,IDT;DIN EN ISO 11810-1-2008,IDT;BS EN ISO 11810-1-2005,IDT;BS EN ISO 11810-1-2009,IDT;EN ISO 11810-1-2005,IDT;EN ISO 11810-1-2009,IDT;prEN ISO 11810-1-2008,IDT;NF S97-132-1-2005,IDT;NF S97-132-1-2009,IDT;S97-132-1PR,IDT;SN EN ISO 11810-1-2006,IDT;SN EN ISO 11810-1-2009,IDT;OENORM EN ISO 11810-1-2005,IDT;OENORM EN ISO 11810-1-2009,IDT;OENORM EN ISO 11810-1/A1-2009,IDT;OENORM EN ISO 11810-2-2006,IDTN-EN ISO 11810-1-2005,IDTN-EN ISO 11810-1-2006,IDTN-EN ISO 11810-1-2009,IDT;UNE-EN ISO 11810-1-2006,IDT;UNE-EN ISO 11810-1-2010,IDT
起草单位：ISO/TC 172
标准简介：This part of ISO 11810 is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient protective covers which claim to be laser-resistant.
The purpose of this part of ISO 11810 is to provide a standardized method for testing and classifying surgical drapes and other patient protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of this part of ISO 11810 to serve as a general fire safety specification, and as such, this part of ISO 11810 does not cover other sources of ignition. It also does not cover the issue of laser-induced secondary ignition.
All materials reflect portions of the beam and it is necessary for the user to decide whether specular reflectance may be a hazard. This measurement, however, is not covered in this part of ISO 11810.
文件格式：PDF
文件大小：429.23KB
文件页数：18
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：