ISO 18276-2005 焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类.pdf

标准号：ISO 18276-2005
实施状态：作废
中文名称：焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类
英文名称：Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification
发布日期：2005-02
被替代标准：ISO 18276-2017
代替标准：ISO/FDIS 18276-2004
采用标准：DIN EN 12535-2000,MOD;DIN EN ISO 18276-2006,IDT;DIN EN ISO 18276-2006,IDT;BS EN ISO 18276-2006,IDT;EN ISO 18276-2006,IDT;prEN ISO 18276-2005,IDT;NF A81-352-2006,IDT;A81-352PR,IDT;JIS Z 3313-2009,MOD;SN EN ISO 18276-2006,IDT;OENORM EN ISO 18276-2006,IDT;OENORM EN ISO 18276-2006,IDTN-EN ISO 18276-2006,IDTN-EN ISO 18276-2008,IDT;SS-EN ISO 18276-2006,IDT;UNE-EN ISO 18276-2007,IDT;KS B ISO 18276-2006,IDT;KS B ISO 18276-2016,IDT;TS EN 12535-2005,NEQ;DS/EN ISO 18276-2006,IDT;UNI EN ISO 18276-2007-2007,IDT;STN EN ISO 18276-2006,IDT;CSN EN ISO 18276-2007,IDT;DS/EN ISO 18276-2006,IDT;NEN-EN-ISO 18276-2006 en-2006,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in the post-weld heat-treated condition with a minimum yield strength higher than 550 MPa or a minimum tensile strength higher than 590 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if used with more than one.
This document is a combined specification providing classification utilizing a system based upon the yield strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal.
1)    Subclauses and tables which carry the suffix letter "A" are applicable only to tubular cored electrodes classified under the system based upon the yield strength and an average impact energy of 47 J of the all-weld metal given in this International Standard.
2)    Subclauses and tables which carry the suffix letter "B" are applicable only to tubular cored electrodes classified under the system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal given in this International Standard.
3)    Subclauses and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all tubular cored electrodes classified under this International Standard.
It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current but, for the purposes of this International Standard, pulsed current is not used for determining the electrode classification.
文件格式：PDF
文件大小：1.69MB
文件页数：30
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：