ISO 17632-2004 焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类.pdf

标准号：ISO 17632-2004
实施状态：作废
中文名称：焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类
英文名称：Welding consumables  Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels  Classification (First edition)
发布日期：2004-10
被替代标准：ISO 17632-2015
代替标准：ISO/FDIS 17632-2004
采用标准：DIN 8559-101-1991,MOD;DIN EN ISO 17632-2008,IDT;DIN EN ISO 17632-2007,IDT;BS EN ISO 17632-2008,IDT;EN 758-1997,IDT;EN ISO 17632-2008,IDT;prEN ISO 17632-2007,IDT;NF A81-350-2008,IDT;A81-350PR,IDT;JIS Z 3313-2009,MOD;SN EN ISO 17632-2008,IDT;OENORM EN ISO 17632-2008,IDT;OENORM EN ISO 17632-2007,IDTN-EN ISO 17632-2008,IDT;UNE-EN ISO 17632-2009,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for classification of tubular cored electrodes with or without
a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded condition or in the postweld
heat-treated condition with a minimum yield strength of up to 500 MPa or a minimum tensile strength of
up to 570 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if any.
This International Standard is a combined specification providing classification utilizing a system based upon
the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon
the tensile strength and the average impact energy of 27 J of all-weld metal.
1) Paragraphs and tables which carry the suffix letter “A” are applicable only to tubular cored electrodes
classified to the system based upon the yield strength and the average impact energy of 47 J of allweld
metal in accordance with this International Standard.
2) Paragraphs and tables which carry the suffix letter “B” are applicable only to tubular cored electrodes
classified to the system based upon the tensile strength and the average impact energy of 27 J of allweld
metal in accordance with this International Standard.
3) Paragraphs and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicable
to all tubular cored electrodes classified in accordance with this International Standard.
It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of
pulsed current, but for the purposes of this International Standard, pulsed current is not permitted for
determining the electrode classification.
文件格式：PDF
文件大小：2.05MB
文件页数：34
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：