麦田学社 下载中心 ISO_TS 17892-4-2004 土工勘查和检验.土壤的实验室检验.第4部分_粒径分布的测定.pdf

版块导航

热门下载

麦田学社 © my678.cn

ISO_TS 17892-4-2004 土工勘查和检验.土壤的实验室检验.第4部分_粒径分布的测定.pdf

 

ISO/TS 17892-4-2004 土工勘查和检验.土壤的实验室检验.第4部分:粒径分布的测定:
标准号:ISO/TS 17892-4-2004
实施状态:作废
中文名称:土工勘查和检验.土壤的实验室检验.第4部分:粒径分布的测定
英文名称:Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
发布日期:2004-10
被替代标准:ISO 17892-4-2016
采用标准:DIN ISO/TS 17892-4-2005,IDT;CEN ISO/TS 17892-4-2004,IDT;CEN ISO/TS 17892-4/AC-2005,IDT;XP P94-512-4-2005,IDT;OENORM CEN ISO/TS 17892-4-2005,IDTKN-CEN ISO/TS 17892-4-2009,IDT
起草单位:ISO/TC 182
标准简介:This document describes methods for the determination of the particle size distribution of soil samples.
The particle size distribution is one of the most important physical characteristics of soil. Classification of soils is mainly based on the particle size distribution. Many geotechnical and geohydrological properties of soil are related to the particle size distribution.
The particle size distribution provides a description of soil, based on a subdivision in discrete classes of particle sizes. The size of each class can be determined by sieving and/or sedimentation. For soils with less than 10 % fines, the sieving method is applicable. Soils with more than 10 % fines can be analysed by a combination of sieving and sedimentation.
Sieving is the process whereby the soil is separated in particle size classes by the use of test sieves. Sedimentation is the process of the setting of soil particles in a liquid. The difference in settling rate enables the particle size classes to be separated. Two sedimentation methods are described; the hydrometer method and the pipette method.
The methods described are applicable to all non-cemented soils with particle sizes less than 125 mm.
Depending on the purpose for the determination of the particle size distribution, pretreatment or correction for calcium carbonate, dissolved salts and/or organic matter can be required. The use of these methods should be stated in the laboratory report.
Modern methods that incorporate detection systems using x-rays, laser beams, density measurements and particle counters are not covered by this document.
文件格式:PDF
文件大小:569.52KB
文件页数:36
(以上信息更新时间为:2019-11-22)



文档语言及版本参照下方封面截图:
ISO/TS 17892-4-2004 土工勘查和检验.土壤的实验室检验.第4部分:粒径分布的测定
点击下方链接查看更多内容。