ISO 9328-5-2004 压力用途扁钢产品.交货技术条件.第5部分_热机辊轧可焊细粒钢.pdf

标准号：ISO 9328-5-2004
实施状态：作废
中文名称：压力用途扁钢产品.交货技术条件.第5部分:热机辊轧可焊细粒钢
英文名称：Steel flat products for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled
发布日期：2004-08
被替代标准：ISO 9328-5-2011
采用标准：DIN EN 10028-5-2003,MOD;JIS G 3115-2010,MOD;JIS G 3126-2009,MOD
起草单位：ISO/TC 17
标准简介：This part of ISO 9328 specifies the requirements for flat products for pressure equipment, made of thermomechanically rolled weldable fine grain steels as specified in Tables A.1 and B.1. The steels are not suitable for hot forming.
Until now, no sufficient data for the standardization of the elevated temperature properties of these steels are available. If their use at such temperatures is intended, the conditions for this shall be specially agreed upon between the interested parties.
The requirements and definitions of ISO 9328-1 also apply to this part of ISO 9328.
NOTE    Fine grain steels are understood to be steels with a ferritic grain size of 6 or finer when tested in accordance with ISO 643.
文件格式：PDF
文件大小：222.33KB
文件页数：22
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：