ISO 16333-2004 大型商用车辆和客车.稳态倾翻阈.倾斜台试验方法.pdf

标准号：ISO 16333-2004
实施状态：作废
中文名称：大型商用车辆和客车.稳态倾翻阈.倾斜台试验方法
英文名称：Heavy commercial vehicles and buses - Steady-state rollover threshold - Tilt-table test method
发布日期：2004-08
被替代标准：ISO 16333-2011
代替标准：ISO/DIS 16333-2003
起草单位：ISO/TC 22
标准简介：This International Standard specifies a tilt-table test method for estimating the steady-state rollover threshold of a heavy commercial vehicle or bus, i.e. the maximum lateral acceleration that the test vehicle could sustain in steady-state turning without rolling over.
It is applicable to complete roll units/combinations of roll-coupled vehicle units — e.g. single-unit vehicles, tractor-semitrailer combinations, articulated buses, full trailers, B-train combinations — of commercial vehicles, commercial vehicle combinations, buses or articulated buses as defined in ISO 3833, and under Categories M3, N2, N3, 03 and 04 of ECE and EC vehicle regulations (trucks and trailers with maximum weights above 3,5t and buses and articulated buses with maximum weights above 5 t).
It does not cover transient, vibratory or dynamic rollover situations; nor does it consider the influences of dynamic stability control systems. Furthermore, the quality of the estimate of the steady-state rollover threshold provided by the test method decreases as the tilt angle required to produce rollover increases. Even so, the results for heavy vehicles with high rollover thresholds can be used for comparing their relative steady-state roll stability.
NOTE    For further limitations of the specified test method, see Annex B.
文件格式：PDF
文件大小：267.54KB
文件页数：24
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：