ISO 15614-1-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分_钢的电弧焊和气焊及镍和镍合金的电弧焊.pdf

标准号：ISO 15614-1-2004
实施状态：作废
中文名称：金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的电弧焊和气焊及镍和镍合金的电弧焊
英文名称：Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
发布日期：2004-06
被替代标准：ISO 15614-1-2017
代替标准：ISO 9956-3-1995;ISO 9956-3 AMD 1-1998;ISO/FDIS 15614-1-2003
采用标准：DIN EN ISO 15614-1-2004,IDT;DIN EN ISO 15614-1-2008,IDT;DIN EN ISO 15614-1-2012,IDT;BS EN ISO 15614-1+A2-2004,IDT;GB/T 19869.1-2005,IDT;EN ISO 15614-1-2004,IDT;NF A89-057-1-2005,IDT;SN EN ISO 15614-1-2004,IDT;OENORM EN ISO 15614-1-2005,IDT;OENORM EN ISO 15614-1-2010,IDT;OENORM EN ISO 15614-1-2012,IDT;OENORM EN ISO 15614-1/A1-2006,IDT;OENORM EN ISO 15614-1/A2-2011,IDTN-EN ISO 15614-1-2005,IDTN-EN ISO 15614-1-2008,IDT;SS-EN ISO 15614-1-2004,IDT;UNE-EN ISO 15614-1-2005,IDT;SANS 15614-1-2007,IDT;KS B ISO 15614-1-2007,IDT;GOST R ISO 15614-1-2009,IDT;TS EN ISO 15614-1-2007,IDT;DS/EN ISO 15614-1-2006,IDT;UNI EN ISO 15614-1-2005-2005,IDT;UNI EN ISO 15614-1-2008-2008,IDT;UNI EN ISO 15614-1-2012-2012,IDT;STN EN ISO 15614-1-2005,IDT;SANS 15614-1-2007,IDT;SANS 15614-1-2007-2007,IDT;CSN EN ISO 15614-1-2005,IDT;DS/EN ISO 15614-1-2006,IDT;NEN-EN-ISO 15614-1-2004 en-2004,IDT;NEN-EN-ISO 15614-1-2004 nl-2004,IDT;SANS 15614-1-2007-2007,IDT
起草单位：ISO/TC 44
标准简介：This European Standard is part of a series of standards, details of this series are given in EN ISO 15607:2003, annex A.
This standard specifies how a preliminary welding procedure specification is qualified by welding procedure tests.
This standard defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in clause 8.
Tests shall be carried out in accordance with this standard. Additional tests may be required by application standards.
This standard applies to the arc and gas welding of steels in all product forms and the arc welding of nickel and nickel alloys in all product forms
Arc and gas welding are covered by the following processes in accordance with EN ISO 4063:
111 - manual metal arc welding (metal-arc welding with covered electrode);
114 - self-shielded tubular-cored arc welding;
12  - submerged arc welding;
131 - metal inert gas welding, MIG welding;
135 - metal active gas welding, MAG welding;
136 - tubular-cored metal arc welding with active gas shield;
137 - tubular-cored metal arc welding with inert gas shield;
141 - tungsten inert gas arc welding; TIG welding;
15  - plasma arc welding;
311 - oxy-acetylene welding.
The principles of this European Standard may be applied to other fusion welding processes.
文件格式：PDF
文件大小：449.73KB
文件页数：36
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：