ISO 2408-2004 一般用途钢丝绳.最低要求.pdf

标准号：ISO 2408-2004
实施状态：作废
中文名称：一般用途钢丝绳.最低要求
英文名称：Steel wire ropes for general purposes - Minimum requirements
发布日期：2004-02
被替代标准：ISO 2408-2017
代替标准：ISO 2408-1985;ISO/FDIS 2408-2003
采用标准：DIN EN 12385-1-2003,MOD;ABNT NBR ISO 2408 Versão Corrigida-2008,IDT;ABNT NBR ISO 2408 Versão Corrigida 2-2008,IDT;JIS G 3525-2006,MOD;JIS G 3525-2013,MOD;SANS 2408-2005,IDT;TS EN 12385-1-2005,NEQ;TS EN 12385-4-2005,NEQ;SANS 2408-2005;SABS ISO 2408-2005-2005,IDT;SANS 2408-2005;SABS ISO 2408-2005-2005,IDT
起草单位：ISO/TC 105
标准简介：This International Standard specifies minimum requirements for the manufacture and testing of stranded steel
wire ropes for general purposes, including lifting equipment such as cranes and hoists. Ropes for slings are
also dealt with, and tables giving minimum breaking forces for the more common sizes, grades and
constructions of stranded rope presented. It is applicable to single-layer, rotation-resistant and parallel-closed
ropes made from wires of uncoated (bright), zinc-coated and zinc-alloy coated finish in rope diameters of up to
60 mm, supplied as bulk manufacture. It is not applicable to ropes for
-mining purposes,
-aircraft control,
-the petroleum and natural gas industries,
-aerial ropeways and funiculars,
-lifts, or
-fishing purposes.
文件格式：PDF
文件大小：931.28KB
文件页数：42
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：