ISO 15156-3-2003 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分_耐裂化CRAs(耐腐蚀合金)和其他合金.pdf

标准号：ISO 15156-3-2003
实施状态：作废
中文名称：石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金
英文名称：Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
发布日期：2003-12
被替代标准：ISO 15156-3-2009
代替标准：ISO/FDIS 15156-3-2003
采用标准：DIN EN ISO 15156-3-2005,IDT;BS EN ISO 15156-3-2003,IDT;EN ISO 15156-3-2003,IDT;NF M87-229-3-2004,IDT;SN EN ISO 15156-3-2004,IDT;OENORM EN ISO 15156-3-2004,IDT
起草单位：ISO/TC 67
标准简介：This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment, used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials' requirements of the appropriate design codes, standards or regulations.
This part of ISO 15156 addresses the resistance of these materials to damage that may be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically-induced hydrogen stress-cracking (GHSC).
This part of ISO 15156 is only concerned with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.
Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions.
This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using conventional elastic design criteria. For designs utilizing plastic criteria (e.g. strain-based and limit-state designs), see ISO 15156-1:2001, Clause 5.
This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.
文件格式：PDF
文件大小：1.33MB
文件页数：100
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：