ISO 15877-2-2003 冷热水装置用塑料管道系统.氯化聚氯乙烯(PVC-C).第2部分_管道.pdf

标准号：ISO 15877-2-2003
实施状态：作废
中文名称：冷热水装置用塑料管道系统.氯化聚氯乙烯(PVC-C).第2部分:管道
英文名称：Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes
发布日期：2003-12
被替代标准：ISO 15877-2-2009
代替标准：ISO/FDIS 15877-2-2002
采用标准：DIN EN 12731-2-1997,IDT;DIN EN ISO 15877-2-2004,IDT;BS EN ISO 15877-2-2004,IDT;EN ISO 15877-2-2003,IDT;NF T54-014-2-2004,IDT;SN EN ISO 15877-2-2004,IDT;OENORM EN ISO 15877-2-2004,IDT;UNE-EN ISO 15877-2-2004,IDT
起草单位：ISO/TC 138
标准简介：This Part of EN ISO 15877:2003 specifies the requirements of pipes made from chlorinated poly(vinyl chloride) (PVC-C) for piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems), under design pressures and temperatures appropriate to the class of application (see Table 1 of EN ISO 15877-1:2003).
This standard covers a range of service conditions (application classes), design pressures and pipe series. For values of TD, Tmax and Tmal in excess of those in Table 1 of Part 1, this standard does not apply.
NOTE      It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
It also specifies the test parameters for the test methods referred to in this standard.
In conjunction with the other Parts of EN ISO 15877 (see Foreword) it is applicable to PVC-C pipes, their joints and to joints with components of PVC-C, other plastics and non-plastics materials intended to be used for hot and cold water installations.
文件格式：PDF
文件大小：270.04KB
文件页数：22
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：