ISO 16701-2003 金属及合金的腐蚀.调节空气中的腐蚀.暴露于间歇喷洒盐溶液和潮湿循环受控环境下的加速腐蚀试验.pdf

标准号：ISO 16701-2003
实施状态：作废
中文名称：金属及合金的腐蚀.调节空气中的腐蚀.暴露于间歇喷洒盐溶液和潮湿循环受控环境下的加速腐蚀试验
英文名称：Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
发布日期：2003-12
被替代标准：ISO 16701-2015
代替标准：ISO/FDIS 16701-2003
采用标准：DIN EN ISO 16701-2008,IDT;DIN EN ISO 16701-2007,IDT;BS EN ISO 16701-2003,IDT;GB/T 20853-2007,IDT;EN ISO 16701-2008,IDT;prEN ISO 16701-2007,IDT;NF A05-216-2008,IDT;A05-216PR,IDT;SN EN ISO 16701-2008,IDT;OENORM EN ISO 16701-2008,IDT;OENORM EN ISO 16701-2007,IDTN-EN ISO 16701-2008,IDTN-EN ISO 16701-2010,IDT;UNE-EN ISO 16701-2009,IDT
起草单位：ISO/TC 156
标准简介：This International Standard defines an accelerated corrosion test method to be used in assessing the
corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly
as sodium chloride from a marine source or road de-icing salt.
This International Standard specifies the test apparatus and test procedure to be used in conducting the
accelerated corrosion test to simulate, in a very controlled way, atmospheric corrosion conditions.
In this International Standard, the term “metal” includes metallic materials with or without corrosion protection.
The accelerated laboratory corrosion test applies to
 metals and their alloys;
 metallic coatings (anodic and cathodic);
 chemical conversion coatings;
 organic coatings on metals.
The method is especially suitable for comparative testing in the optimization of surface treatment systems.
文件格式：PDF
文件大小：282.38KB
文件页数：20
（以上信息更新时间为：2019-11-22）



文档语言及版本参照下方封面截图：