ISO 17123-6-2003 光学和光学仪器.大地测量和测绘仪器的现场试验规程.第6部分_旋转激光器.pdf

标准号：ISO 17123-6-2003
实施状态：作废
中文名称：光学和光学仪器.大地测量和测绘仪器的现场试验规程.第6部分:旋转激光器
英文名称：Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
发布日期：2003-03
被替代标准：ISO 17123-6-2012
代替标准：ISO 8322-6-1991;ISO/FDIS 17123-6-2002
采用标准：JIS B 7912-6-2007,MODN-ISO 17123-6-2006,IDT
起草单位：ISO/TC 172
标准简介：This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying, measurements for levelling tasks. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature.
This part of ISO 17123 can be thought of as one of the first steps in the process of evaluating the uncertainty of a measurement (more specifically a measurand). The uncertainty of a result of a measurement is dependent on a number of factors. These include among others: repeatability, reproducibility (between day repeatability) and a thorough assessment of all possible error sources, as prescribed by the ISO Guide to the expression of uncertainty in measurement (GUM).
These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposefully designed to minimize atmospheric influences.
文件格式：PDF
文件大小：309.22KB
文件页数：26
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：