ISO 10771-1-2002 液压传动.金属压力容器外层的压力疲劳试验.第1部分_试验方法.pdf

标准号：ISO 10771-1-2002
实施状态：作废
中文名称：液压传动.金属压力容器外层的压力疲劳试验.第1部分:试验方法
英文名称：Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method
发布日期：2002-08
被替代标准：ISO 10771-1-2015
代替标准：ISO/FDIS 10771-1-2002
采用标准：DIN ISO 10771-1-1999,IDT;BS ISO 10771-1-2002,IDT;GB/T 19934.1-2005,IDT
起草单位：ISO/TC 131
标准简介：This part of ISO 10771 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads.
This part of ISO 10771 is only applicable to component pressure-containing envelopes that:
—  are manufactured from metals;
—  are operated at temperatures that exclude creep and low-temperature embrittlement;
—  are only subjected to pressure-induced stresses;
—  are not subjected to loss of strength due to corrosion or other chemical action;
—  may include gaskets, seals and other non-metallic components; however, these are not considered part of the pressure-containing envelope being tested, (see note 3 in 5.5).
This part of ISO 10771 does not apply to piping as defined in ISO 4413 (i.e. connectors, hose, tubing, pipe). See ISO 8434-5, ISO 6803 and ISO 6605 for methods of fatigue testing of piping devices.
This part of ISO 10771 establishes a general test method that is applicable for many hydraulic fluid power components, but additional requirements or more specific methods that may be required for particular components are contained in the annexes or other standards.
文件格式：PDF
文件大小：248.91KB
文件页数：22
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：