ISO 9239-1-2002 地板覆盖物对火反应试验.第1部分_使用辐射热源的燃烧性能的测定.pdf

标准号：ISO 9239-1-2002
实施状态：作废
中文名称：地板覆盖物对火反应试验.第1部分:使用辐射热源的燃烧性能的测定
英文名称：Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
发布日期：2002-01
被替代标准：ISO 9239-1-2010
代替标准：ISO 9239-1-1997;ISO/FDIS 9239-1-2001;ISO 9239-1 Technical Corrigendum 1-1997;ISO 9239-1 Technical Corrigendum 2-1998
采用标准：DIN 4102-14-1990,MOD;DIN EN ISO 9239-1-2002,IDT;BS EN ISO 9239-1-2002,IDT;GB/T 11785-2005,NEQ;EN ISO 9239-1-2002,IDT;NF P92-523-2002,IDT;SN EN ISO 9239-1-2002,IDT;OENORM EN ISO 9239-1-2002,IDT;UNE-EN ISO 9239-1-2002,IDT
起草单位：ISO/TC 92
标准简介：This European Standard specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required.
This method is applicable to all types of flooring e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results.
This European Standard is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions.
Information on the precision of the test method is given in annex B.
文件格式：PDF
文件大小：358.37KB
文件页数：32
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：