ISO 6520-2-2001 焊接及相关工艺 金属材料的几何缺陷的分类 第2部分：压焊.pdf

标准号：ISO 6520-2-2001
实施状态：作废
中文名称：焊接及相关工艺  金属材料的几何缺陷的分类  第2部分：压焊
英文名称：Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure
发布日期：2001-12
被替代标准：ISO 6520-2-2013
代替标准：ISO/FDIS 6520-2-1999
采用标准：DIN EN ISO 6520-2-2002,IDT;BS EN ISO 6520-2-2002,IDT;GB/T 6417.2-2005,IDT;EN ISO 6520-2-2001,IDT;NF A80-230-2-2003,IDT;SN EN ISO 6520-2-2001,IDT;OENORM EN ISO 6520-2-2002,IDTN-EN ISO 6520-2-2005,IDT;UNE-EN ISO 6520-2-2002,IDT;GOST R ISO 6520-2-2009,IDT
起草单位：ISO/TC 44
标准简介：This European Standard collects and classifies the possible imperfections in welds made with pressure. A uniform designation is specified. Only the type, shape and dimensions of the different imperfections caused by welding with pressure are included. Metallurgical deviations are not taken into account. Imperfections produced other than by the welding operation, for example additional stresses, loads or environmental factors are not covered by this standard.
Information concerning the consequences of the mentioned imperfections and the use of particular structures is not given because this depends on the specific requirements of the joint.
文件格式：PDF
文件大小：495.90KB
文件页数：32
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：