ISO 1986-1-2001 带有卧轴和往复式台的平面磨床的检验条件 精度检验 第1部分：台长为1600mm以下的磨床.pdf

标准号：ISO 1986-1-2001
实施状态：作废
中文名称：带有卧轴和往复式台的平面磨床的检验条件  精度检验  第1部分：台长为1600mm以下的磨床
英文名称：Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1: Machines with a table length of up to 1600 mm
发布日期：2001-11
被替代标准：ISO 1986-1-2014
代替标准：ISO 1986-1985;ISO/FDIS 1986-1-2001
采用标准：DIN 8632-1-1989,MOD;BS ISO 1986-1-2001,IDT;GB/T 4022.1-2007,MOD;NF E60-121-2002,IDT;JIS B 6213-2006,IDT;SN ISO 1986-1-2001,IDT;UNE 15315-1-2006,IDT
起草单位：ISO/TC 39
标准简介：This part of ISO 1986 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal accuracy surface grinding machines with reciprocating table up to 1 600 mm table length and horizontal grinding wheel spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests.
NOTE  For machines with table length larger than 1 600 mm, ISO 1986-2 is being prepared.
It is not applicable to surface grinding machines with fixed or rotating tables or to machines having longitudinal traverse of the wheelhead.
This part of ISO 1986 deals only with the verification of the accuracy of the machine; it does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the machine characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy.
This part of ISO 1986 provides the terminology used for the principal components of the machine and indicates the designation of the axes in accordance with reference to ISO 841.
文件格式：PDF
文件大小：154.94KB
文件页数：22
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：