标准号:ISO 2759-2001
实施状态:作废
中文名称:耐破强度的测定
英文名称:Board - Determination of bursting strength
发布日期:2001-11
被替代标准:ISO 2759-2014
代替标准:ISO 2759-1983;ISO/FDIS 2759-2001
采用标准:DIN 53141-1-1979,MOD;DIN EN ISO 2759-2003,IDT;DIN ISO 2759-2002,IDT;BS EN ISO 2759-2002,IDT;GB/T 1539-2007,IDT;EN ISO 2759-2003,IDT;prEN ISO 2759-2002,IDT;Q03-054PR,IDT;NF Q03-114-2004,IDT;JIS P 8131-2009,MOD;SN EN ISO 2759-2003,IDT;OENORM EN ISO 2759-2003,IDT;OENORM EN ISO 2759-2003,IDT
N-EN ISO 2759-2005,IDT;UNE 57059-2002,IDT;UNE-EN ISO 2759-2004,IDT
起草单位:ISO/TC 6
标准简介:This International Standard specifies a method for measuring the bursting strength of board submitted to increasing hydraulic pressure. It is applicable to all types of board (including corrugated and solid fibreboard) having bursting strengths within the range 350 kPa to 5 500 kPa. It is also applicable to papers or boards having bursting strengths as low as 250 kPa if the paper or board is to be used to prepare a material of higher bursting strength, such as corrugated board. In such cases, the measurements will not necessarily have the accuracy or precision stated for this method and it is necessary to include a note in the test report stating that the test gave results that were below the minimum value required by the method.
In the absence of any commercial agreement as to which method should be used for materials with bursting strengths between 350 kPa and 1 400 kPa, all materials with bursting strengths below 600 kPa, except components of solid and corrugated fibreboard, should be tested by ISO 2758 and the remainder by this International Standard.
文件格式:PDF
文件大小:121.46KB
文件页数:18
(以上信息更新时间为:2019-11-23)
文档语言及版本参照下方封面截图:
点击下方链接查看更多内容。