ISO 10414-1-2001 石油和天然气工业 钻探油液的现场试验 第1部分：水基油液.pdf

标准号：ISO 10414-1-2001
实施状态：作废
中文名称：石油和天然气工业  钻探油液的现场试验  第1部分：水基油液
英文名称：Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
发布日期：2001-03
被替代标准：ISO 10414-1-2008
代替标准：ISO/FDIS 10414-1-2000
采用标准：ANSI/API RP 13B-1-2003,IDT;BS ISO 10414-1-2001,IDT
起草单位：ISO/TC 67
标准简介：This part of ISO 10414 provides standard procedures for the determining following characteristics of water-based drilling fluids:
a)    drilling fluid density (mud weight);
b)    viscosity and gel strength;
c)    filtration;
d)    water, oil and solids contents;
e)    sand content;
f)    methylene blue capacity;
g)    pH;
h)    alkalinity and lime content;
i)    chloride content;
j)    total hardness as calcium.
Annexes A, B, C and E provide additional test methods which may be used for
k)    chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate, potassium;
l)    determination of shear strength;
m)    determination of resistivity;
n)    drill pipe corrosion monitoring.
Annexes D, F, G and H provide procedures that may be used for
o)    removal of air;
p)    sampling, inspection and rejection;
q)    rig-site sampling;
r)    calibration and verification of glassware, thermometers, viscometers, retort kit cup and drilling fluid balances.
文件格式：PDF
文件大小：673.33KB
文件页数：70
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：