ISO 11114-2-2000 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分_非金属材料.pdf

标准号：ISO 11114-2-2000
实施状态：作废
中文名称：移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分:非金属材料
英文名称：Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
发布日期：2000-12
被替代标准：ISO 11114-2-2013
代替标准：ISO/FDIS 11114-2-1999
采用标准：DIN EN ISO 11114-2-2001,IDT;BS EN ISO 11114-2-2001,IDT;EN ISO 11114-2-2000,IDT;NF E29-648-2-2001,IDT;SN EN ISO 11114-2-2001,IDT;OENORM EN ISO 11114-2-2001,IDTN-EN ISO 11114-2-2002,IDT;UNE-EN ISO 11114-2-2001,IDT
起草单位：ISO/TC 58
标准简介：This Standard gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the cylinders' gas contents. This standard also covers bundles, tubes and pressure drums.
This standard may be helpful for composite and laminated materials.
Only the influence of the gas in changing the material and mechanical properties is considered (for example chemical reaction or change in physical state). The basic mechanical properties of the materials required for design purposes are normally available from the materials supplier and are not considered in this standard.
The compatibility data given are related to single component gases but can be used to some extent for gas mixtures. Ceramics, glasses, and adhesives are not covered by this standard.
Aspects such as quality of delivered gas are not considered.
文件格式：PDF
文件大小：138.93KB
文件页数：24
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：