ISO 5359-2000 医用气体用低压软管组件.pdf

标准号：ISO 5359-2000
实施状态：作废
中文名称：医用气体用低压软管组件
英文名称：Low-pressure hose assemblies for use with medical gases
发布日期：2000-11
被替代标准：ISO 5359-2008
代替标准：ISO 5359-1989;ISO/FDIS 5359-2000;ISO 5359 Technical Corrigendum 1-1995
采用标准：GOST R 52792-2007,IDT
起草单位：ISO/TC 121
标准简介：1  This International Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases:
—  oxygen;
—  nitrous oxide;
—  air for breathing;
—  helium;
—  carbon dioxide;
—  xenon;
—  specified mixtures of the gases listed above;
—  air for driving surgical tools;
—  nitrogen for driving surgical tools;
—  nitric oxide/nitrogen mixtures;
—  vacuum.
It is intended in particular to ensure gas-specificity and to prevent cross-connection between systems conveying different gases.
These hose assemblies are intended to be used at pressures less than 1 400 kPa.
2  This International Standard specifies the allocation of non-interchangeable   screw-threaded (NIST) connectors and diameter-index safety system (DISS) connectors to medical gases and specifies the dimensions of non-interchangeable screw-threaded (NIST) connectors.<up1)>
3  This International Standard does not specify:
—  requirements for coaxial hoses used for the supply and disposal of air for driving surgical tools;
—  requirements for electrical conductivity.
4  This International Standard does not specify the intended uses of hose assemblies.
NOTE   Some examples of intended use specified in other International Standards are as follows:
a)  between a terminal unit and medical equipment (ISO 9170-1, ISO 8835-1, ISO 10651-1);
b)  between the fixed pipeline system and a terminal unit of that system (ISO 7396-1, ISO 11197);
c)  between a terminal unit and a second terminal unit (ISO 7396-1);
d)  between an emergency supply and an emergency and maintenance inlet point of a pipeline system (ISO 10524, ISO 7396-1);
e)  between an emergency supply and medical equipment (ISO 10524, ISO 8835-1, ISO 10651-1).
note: 1) Details and dimensions of DISS connectors can be obtained from the Compressed Gas Association Inc., 1725 Jefferson Davies Highway, Arlington, VA 22202, USA.
文件格式：PDF
文件大小：215.65KB
文件页数：32
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：