EN 771-2-2011 规范圬工单位.第2部分_硅酸钙圬工单位.pdf

标准号：EN 771-2-2011
实施状态：现行
中文名称：规范圬工单位.第2部分:硅酸钙圬工单位
英文名称：Specification for masonry units - Part 2: Calcium silicate masonry units (Incorporates Amendment A1: 2015)
发布日期：2011-05-01
被替代标准：EN 771-2+A1-2015
标准简介：This European Standard specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations and external chimney masonry.This European Standard is intended to apply to all calcium silicate masonry units, including those of an overall nonrectangular parallelepiped shape, specially shaped and accessory units. It defines the performance related to e. g. strength, density and dimensional accuracy, measured according to the corresponding test methods contained in separate European Standards. It provides for the evaluation of conformity of the product toThis European Standard. The marking requirement for products covered byThis document is also included.This European Standard does not specify standard sizes for calcium silicate masonry units, nor standard work dimensions and angles of specially shaped and accessory units. It does not cover units with more than 60 % volume of voids, nor products made from shale as a major raw material. It does not cover storey height panels. It does not cover units intended for use as a damp proof course, nor units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire, nor chimney flue units.
文件格式：PDF
文件大小：1.48MB
文件页数：56
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：