EN ISO 1825-2011 橡胶软管和软管组合件飞机地面加油放油.规范.pdf

标准号：EN ISO 1825-2011
实施状态：现行
中文名称：橡胶软管和软管组合件飞机地面加油放油.规范
英文名称：Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
发布日期：2011-05-01
代替标准：EN 1361-2004;FprEN ISO 1825-2010
采用标准：DIN EN ISO 1825-2011,IDT;BS EN ISO 1825-2011,IDT;NF T47-268-2011,IDT;ISO 1825-2010,IDT;SN EN ISO 1825-2011,IDT;OENORM EN ISO 1825-2011,IDTN-EN ISO 1825-2011,IDT;SS-EN ISO 1825-2011,IDT;UNE-EN ISO 1825-2012,IDT;TS EN ISO 1825-2014,IDT;UNI EN ISO 1825:2011-2011,IDT;STN EN ISO 1825-2011,IDT;CSN EN ISO 1825-2011,IDT;DS/EN ISO 1825-2011,IDT;NEN-EN-ISO 1825:2011 en-2011,IDT;SFS-EN ISO 1825:en-2011,IDT
标准简介：This International Standard specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft.All four types are designed for a) use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume;b) operation within the temperature range of −30 °C to +65 °C and such that they will be undamaged by climatic conditions of −40 °C to +70 °C when stored in static conditions;c) operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service.
文件格式：PDF
文件大小：1.09MB
文件页数：38
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：