EN 413-1-2011 砌筑水泥-第1部分_组成,规范和合格标准.pdf

标准号：EN 413-1-2011
实施状态：现行
中文名称：砌筑水泥-第1部分:组成,规范和合格标准
英文名称：Masonry cement - Part 1: Composition@ specifications and conformity criteria
发布日期：2011-04-01
代替标准：EN 413-1-2004;FprEN 413-1-2010
采用标准：DIN EN 413-1-2011,IDT;BS EN 413-1-2011,IDT;NF P15-102-1-2012,IDT;SN EN 413-1-2011,IDT;OENORM EN 413-1-2011,IDTN-EN 413-1-2011,IDTN-EN 413-1-2013,IDT;SS-EN 413-1-2011,IDT;UNE-EN 413-1-2011,IDT;SANS 50413-1-2014,IDT;UNI EN 413-1:2011-2011,IDT;STN EN 413-1-2011,IDT;SANS 50413-1-2014,IDT;SANS 50413-1:2014-2014,IDT;CSN EN 413-1-2011,IDT;DS/EN 413-1-2011,IDT;NEN-EN 413-1:2011 en-2011,IDT;SANS 50413-1:2014-2014,IDT;SFS-EN 413-1:en-2012,IDT
标准简介：This European Standard specifies the definition and composition of masonry cements as commonly used in Europe for the production of mortar for bricklaying and blocklaying and for rendering and plastering. It includes physical, mechanical and chemical requirements and defines strength classes. EN 413-1 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in EN 413-1, in EN 998-1 and in EN 998-2 is generally sufficient. However, in special cases, an exchange of additional information between the masonry cement producer and user can be helpful. The details of such an exchange are not within the scope of EN 413-1 but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
文件格式：PDF
文件大小：1.04MB
文件页数：40
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：