EN 13411-4-2011 钢丝绳接线端.安全性.第4部分_金属和树脂套接.pdf

标准号：EN 13411-4-2011
实施状态：现行
中文名称：钢丝绳接线端.安全性.第4部分:金属和树脂套接
英文名称：Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
发布日期：2011-03-01
代替标准：EN 13411-4-2002+A1-2008
采用标准：DIN EN 13411-4-2011,IDT;BS EN 13411-4-2011,IDT;NF A47-251-4-2011,IDT;SN EN 13411-4-2011,IDT;OENORM EN 13411-4-2011,IDTN-EN 13411-4-2011,IDTN-EN 13411-4-2013,IDT;SS-EN 13411-4-2011,IDT;UNE-EN 13411-4-2011,IDT;SANS 53411-4-2015,IDT;TS EN 13411-4-2015,IDT;UNI EN 13411-4:2011-2011,IDT;STN EN 13411-4-2011,IDT;SANS 53411-4-2015,IDT;SANS 53411-4:2015-2015,IDT;CSN EN 13411-4-2011,IDT;DS/EN 13411-4-2012,IDT;NEN-EN 13411-4:2011 en-2011,IDT;SANS 53411-4:2015-2015,IDT;SFS-EN 13411-4-2011,IDT;SFS-EN 13411-4:en-2011,IDT
标准简介：This European Standard specifies the minimum requirements for the molten metal and resin socketing of steel wire ropes within the scopes of EN 12385-4:2002+A1:2008; EN 12385-5:2002; EN 12385-6:2004; EN 12385-7:2002; EN 12385-8:2002; EN 12385-9:2002 and EN 12385-10:2003+A1:2008. The European Standard is applicable only to those requirements that ensure that the socketing is strong enough to withstand a force of at least 100 % of the minimum breaking force of the rope (i.e. socket termination efficiency factor KT = 1,0). NOTE Rope terminations made by socketing in accordance withThis European Standard can be used for determining the breaking force of wire ropes in accordance with EN 12385-1:2002+A1:2008, Annex A. Socketing by the methods and materials described inThis standard are for use within the temperature limits given in normative Annex E.This European Standard deals with all significant hazards, hazardous situations and events relevant to metal and resin socket terminations, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).
文件格式：PDF
文件大小：694.46KB
文件页数：28
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：