EN 10264-3-2012 钢丝和钢丝产品.钢丝绳索.第3部分_圆形和形状的非合金钢丝为高性能的应用程序.pdf

标准号：EN 10264-3-2012
实施状态：现行
中文名称：钢丝和钢丝产品.钢丝绳索.第3部分:圆形和形状的非合金钢丝为高性能的应用程序
英文名称：Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications
发布日期：2012-01-01
代替标准：EN 10264-3-2002
采用标准：DIN EN 10264-3-2012,IDT;BS EN 10264-3-2012,IDT;NF A37-604-3-2012,IDT;SN EN 10264-3-2012,IDT;OENORM EN 10264-3-2012,IDTN-EN 10264-3-2012,IDT;SS-EN 10264-3-2012,IDT;UNE-EN 10264-3-2012,IDT;UNI EN 10264-3:2012-2012,IDT;STN EN 10264-3-2012,IDT;CSN EN 10264-3-2012,IDT;DS/EN 10264-3-2012,IDT;NEN-EN 10264-3:2012 en-2012,IDT;SFS-EN 10264-3:en-2012,IDT
标准简介：This part of this European Standard specifies round and shaped non alloyed steel wire for use in the manufacture of ropes for mine hoisting, man-riding haulage, cableways for the transportation of passengers and other high duty applications. Heavy duty refers to situations where the stresses applied to the rope are either high or vary by a large amount during service.This part of this European Standard refers to round wires and three types of shaped wire: full lock (Z), half lock (H) and trapezoidal (T). In addition to the requirements of this part of this European Standard, the requirements of EN 10264-1 also apply. It does not apply to steel wire taken from manufactured ropes.This part of this European Standard specifies the following for cold drawn non alloyed steel wire for ropes for high duty applications: dimensional tolerances; mechanical characteristics; requirements relating to the chemical composition of the steel wire; conditions to be satisfied by any coating.
文件格式：PDF
文件大小：1.15MB
文件页数：20
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：