EN 1870-15-2012 木工机器.圆锯机的安全.第15部分_多用横切锯机器与集成饲料的工件和手动加载和_或卸载.pdf

标准号：EN 1870-15-2012
实施状态：现行
中文名称：木工机器.圆锯机的安全.第15部分:多用横切锯机器与集成饲料的工件和手动加载和/或卸载
英文名称：Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
发布日期：2012
代替标准：EN 1870-15-2004+A1-2009
采用标准：DIN EN 1870-15-2013,IDT;BS EN 1870-15-2012,IDT;NF E64-607-15-2012,IDT;SN EN 1870-15-2012,IDT;OENORM EN 1870-15-2012,IDTN-EN 1870-15-2013,IDTN-EN 1870-15-2016,IDT;SS-EN 1870-15-2012,IDT;UNE-EN 1870-15-2013,IDT;UNI EN 1870-15:2012-2012,IDT;STN EN 1870-15-2013,IDT;CSN EN 1870-15-2013,IDT;DS/EN 1870-15-2012,IDT;NEN-EN 1870-15:2012 en-2012,IDT;SFS-EN 1870-15:en-2013,IDT
标准简介：This European Standard specifies all requirements and/or measures to reduce the hazards and limit the risks on multi-blade cross-cut sawing machines (with minimum two saw unit) with integrated feed of the work-piece and manual loading and/or unloading fitted with a saw blade drive motor for each saw unit, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This document deals with all significant hazards, hazardous situations and events which are relevant to these machines as stated in Clause 4. It does not deal with any hazards relating to the mechanical loading and/or unloading of the work-piece or which result from the combination of the machine with any other. This document does not cover machines designed for climb cutting (see 3.2.10). The requirements of this document apply to all machines whatever their method of control e. g. electromechanical and/or electronic and/or pneumatic. This document is not applicable to multi-blade cross-cut sawing machines with integrated feed of the work-piece and manual loading and/or unloading which are manufactured before the date of its publication as EN. NOTE Machines covered by this document are listed under of Annex IV of the Machinery Directive.
文件格式：PDF
文件大小：1.36MB
文件页数：54
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：